This page gives instructions
on installing and setting-up SpamPal for use with the e-mail program,
Pegasus Mail (http://www.pmail.com/)
|
|
1. Install
SpamPal
2. Configure
SpamPal
3. Configure
your email program
3.1 Change your POP3 settings
3.2 Change your IMAP4 Settings
3.3 Change your SMTP settings
3.4 Create Filter/Message rules
4. Email
Virus Scanners and Firewalls
5. Whitelist
friends and contacts
|
|
Start installation by double-clicking on the SpamPal
Setup program (spampal.exe) and follow
the on-screen instructions. Upon completion, SpamPal will run, showing
its pink umbrella icon in your system tray.
If this installation is an upgrade of SpamPal
then the existing configuration of Pegasus Mail is retained and
the process is now complete. If not, i.e. this is a new installation
of SpamPal, proceed with the steps below.
|
::Top:: |
| All you need to
know about extra configuration can be found here |
::Top:: |
|
SpamPal can either be configured
to run in transparent
or non-transparent
mode.
a) In non-transparent
mode, the user has to reconfigure
their email program to use it. This can sometimes cause problems
for people, as changes have to be made to Username, Server Name
and sometimes even port numbers, in order to get SpamPal to filter
their email. So before
you make any changes, take a note
of your user id
and pop3 server name
b) In transparent mode, the user
doesn't have to reconfigure their email program to use it (apart
from a simple message rule).
|
If you installed SpamPal
in transparent mode then you can
skip the next section(s) and jump straight to the Create
Filter/Message rules section of this manual, which will tell you
how to setup a message rule to move the spam that SpamPal has detected,
away from your inbox and into the a SPAMTRAP folder.
If you installed SpamPal in non-transparent
mode then you have manually set
up your email program to fetch your mail through the SpamPal proxy
rather than directly from your ISP.
You need to know how you collect mail from your ISP, for example,
if you use POP3 to collect your
mail then your only need to change your POP3
settings and not the IMAP4 ones. |
::Top:: |
| For each identity, go to the
Internet Options
dialog (selecting Internet Options from
the Tools menu works for me) and choose
the Receiving (POP3) tab. |
To reconfigure your email program,
first make a careful note of your original settings.
You should append whatever
value you currently have in your
Server Host Name
setting, to whatever you currently
have in the User
name field (seperated
with a @ sign), and change the Server
Host Name setting to 127.0.0.1.
e.g. if your original values
were:
Server Host Name: your.mailserver.com
User name: fred.bloggs
then you would, for example, change them
to:
Server Host Name: 127.0.0.1
User name: fred.bloggs@your.mailserver.com
|
| Screen before
changes: |
|
|
| Screen after
changes: |
|
|
You
may, at this point, get an error message about SpamPal not being
able to listen on the standard POP3 port.This is nothing to
be worried about; just write down the port number SpamPal tells
you and continue with this guide
This message means SpamPal is using Port 1110
instead of 110.
You don't have to put it into SpamPal because SpamPal already
knows it is using port 110.
Instead, you have to tell your email program to use port 1110
instead of 110.
In the Advanced POP3 settings area of this dialog, change
the Connect to server on TCP/IP port setting from 110
to whatever number SpamPal told you. |
|
| Don't
worry; just add @localhost to the username and leave the server
name as is |
|
| Append
the port number to the server name in the login name field using
a colon. For example, if Twinlobber ran their POP3 server on
port 8090, I'd end up with a login name of jjf%pop.twinlobber.org.uk:8090
|
|
|
|
| Incoming
Mail (POP3):mail.btopenworld.com |
Incoming
Mail (POP3): 127.0.0.1 |
| Username:
fred.bloggs |
Username:
fred.bloggs@mail.btopenworld.com |
| Incoming
Mail (POP3): pop.west.cox.net |
Incoming
Mail (POP3): 127.0.0.1 |
| Username:
johnsmith |
Username:johnsmith@pop.west.cox.net |
| Incoming
Mail (POP3): pop.telus.net |
Incoming
Mail (POP3): 127.0.0.1 |
| Username:
fax07734 |
fax07734@pop.telus.net |
| Incoming
Mail (POP3):
192.168.1.1 |
Incoming
Mail (POP3): 127.0.0.1 |
| Username:
mary_jones |
Username:
mary_jones@192.168.1.1 |
|
The
above Incoming POP3
Server Name, can be called:
Incoming Mail Server,
POP3 server, POP3 Username or Account Name depending on your
email program.
There are also two ways of specifying the local
server name, which should mean exactly the same thing (but on
some system only one of them will work): localhost
or 127.0.0.1 |
|
|
Now click OK
to confirm, and repeat this for all the remaining identities.
Now try to check your mail; if you don't get any
errors, continue to the next step. If you get an error from Pegasus
Mail, check that you've configured the incoming POP3 server to localhost
and, if necessary, that the port has been set right. If you get
an error from SpamPal, check you've added the servername to the
username correctly, and that your Internet connection is active
|
| Check
the option Use the e-mail address I supplied for the SMTP
envelope in Internet options, tab: Sending(SMTP). |
|
|
|
| You
need to change the AUTH rules as to NOT use POP3 username and
password, but use the option in Pegasus to actually specify
the username and password. |
|
| If you are still having a problem,
why not give this setup page
a try |
::Top:: |
|
Coming Soon...
|
::Top:: |
| If you wish to use SpamPal's
SMTP Proxy to auto-whitelist any email addresses that you send to,
you will need to change Pegasus Mail's SMTP settings, as follows |
|
|
|
|
Now, take a note of your
current SMTP Server Host Name ,
for example: smtp.myisp.co.uk
Now change the current SMTP Server Host
Name, to: 127.0.0.1
Now go to SpamPal's Connections
page: |
|
|
|
Now click on Add port and change
the Port Type to SMTP
Now, change the Server Name to
the SMTP Server Host Name you
noted down earlier,
e.g..smtp.myisp.co.uk
|
|
|
| Now, whenever you send
an email, SpamPal will automatically auto-whitelist it |
Occasionally, a spammer might
forge the email address of someone who is in your auto-whitelist
- for example, a colleague or an alternate email address or
yours. While you don't want to put this person in your blacklist
because they send you lots of genuine email, you don't want
them to end up in your auto-whitelist and bypass SpamPal's
spam-checking features.
Clicking on the Exclusions
pane will bring up a window into which you can enter the email
addresses of people who should never be added to the auto-whitelist.
Just add your colleagues here and you won't have to worry
about spammers forging their addresses to bypass SpamPal's
filtering. You can even add your entire employer's domain
- e.g. *@acme-widgets.com |
|
::Top:: |
If you are are using an IMAP4
server, you will not need
to setup a filter/message rule on your email program,
as SpamPal moves any spam tagged messages automatically into a folder
called inbox.spamtrap
on your
server.
If you are are using a POP3
server and want your email program to automatically filter the SpamPal-marked
messages into a separate Mailbox, so that you can more easily review
them, continue as follows |
|
Assuming you've already
got a folder setup in Pegasus Mail for example, called spam,
then:
Select the New Mail folder. Go to Mail
Filtering Rules on the Tools menu,
then Edit new mail filtering rules,
then rules applied when folder is opened.
|
|
If you haven't previously created
any rules you may see the rule sets list; in this case select
New on the window that
appears and create a rule set called SpamPal
then select it and click Open.
If you see a list of rules, you can ignore that last sentence |
|
You'll now see a list of all the rules.
(If not, you may have to create and open a new rule set.) Click the
Add rule button, then Expression
to create a regular expression rule. You'll get a window in which
to create the filtering rule. Into the regular expression box at the
top, type:
X-SpamPal: SPAM*
Select headers only. Now select Move
as the action, then Set to choose which
folder to move it to. Click New and create
a folder called Spam Trap. Click Open
to select it (which isn't very logical). You should have ended up
with a rule looking like this: |
|
|
::Top:: |
|
Specific instructions for using a variety of email
virus scanners with SpamPal can be found on the main
installation page
Some email virus filters want to sit between your
mail program and your mail server in just the way that SpamPal does.
There's actually no reason why they can't; you just have them up
in serial so that your virus filter fetches its mail through SpamPal
rather than directly from your mailserver, and then your email program
fetches the mail through the virus filter.
|
::Top:: |
|
In order to speed up the processing of your emails
and to prevent SpamPal from marking your friends or contact's emails
as spam, it's a good idea at this point to whitelist all your important
email addresses.
This can be done in four ways:
a) Use the pop3
automatic whitelist: this will whitelist non-spam
email's that you receive on a frequent basis
b) Use the smtp
automatic whitelist: which (if setup in 3.3)
will whitelist all email addresses that you send out
|
| If
you are using this, especially in a business, as this is recording
all outgoing addresses, some people might view this as an infringement
upon their privacy, (if you are in UK you need to tell staff
of this policy before you start collecting data) |
|
|
c) use
the Add to Whitelist option on
SpamPal's system tray: to manually
whitelist your email addresses by typing in an address (or by using
the dropdown box; to select from a list of recently received address):
|
|
|
| d) Use
the SpamPal Whitelist Email Addresses
page to manually
whitelist your email addresses: |
|
|
The
whitelist function only looks for email addresses in certain
headers of your email.
These headers are currently: From:,
Reply-To:,
Sender:, Mailing-List:
and Return-Path: |
|
|
Initially, you will notice that using SpamPal
makes fetching your email a little slower. This is because SpamPal
has to check everything against the DNSBL lists (Public Blacklists)
to see what email's are from a spammer and which aren't.
However, through it's Auto-Whitelist feature(s),
SpamPal will quickly learn about the people and machines that send
you lots of email, and adds them to a list of trusted senders. Because
they're trusted, SpamPal doesn't waste time any checking the DNSBL
lists (Public Blacklists) for them and so the more you use SpamPal,
the quicker it will get.
There are more hints and tip on how to optimise SpamPal here
|
| This completes the installation
and setup. |
::Top:: |
